Abstract
ABSTRACTHeavy metals contaminated waste water sludge is classified as hazardous solid waste(1). For this reason it needs to be properly treated to prevent releasing heavy metals to the environment.The sludge was treated in a batch reactor (2) by sulfuric acid to extract the contained heavy metals ( Cu; Cd; Ni and Zn).The effects of sulfuric acid concentration and solid to liquid ratio on the heavy metal removal efficiencies were investigated. The experimental results showed that the total and individual heavy metal removal efficiencies increased with increasing sulfuric acid concentration, but decreased with increasing solid to liquid ratio.For 5g/L solid to liquid ratio, more than 99,9% of heavy metals can be removed from the sludge by treating with 0,5 M sulfuric acid in 2h.The separation, of metals extracted by sulfuric acid from the sludge, is carried out by plating on steel substrate (3).The electrode position is performed in two different media: acid and basic media. A comparative study of the two plating media was studied.References;(1) B.Johnke, B.Wiebusch, Fuel Energy .38(1997)350(2) M.A.Styllanou,D.Kollia,K.J.Haralambous,V.J.Inglezakis,K.G.Moustakas,M.D.Loizidou, Desalination215(2007)73-81(3) Mortaga M.Abou-Krisha, Applied surface science 252(2005)1035-1048
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
