Abstract
In the present study, disc type ceramic membranes made from China clay, quartz and calcium carbonate were used for the separation of bacteria Kocuria rhizophila from its broth by shear-enhanced filtration process. Porosity, water permeability and average pore size of the membrane were 42%, 3.24 × 10−4 L m−2 h−1 Pa−1 and 180 nm, respectively. The membrane exhibited good chemical tolerance in acid, alkali and chlorine solutions. The effect of trans-membrane pressure and rotational speed on permeate flux and bacterial rejection was investigated. It was found that the permeate flux increased (40–163.5 L m−2 h−1) and bacterial rejection decreased (99.2–94.5%) with increasing pressure (69–345 kPa). With an increase in rotation (50–250 rpm), the permeate flux increased from 156.5 to 176.8 L m−2 h−1, while bacterial rejection decreased from 94.3 to 83.2%. The pressure of 345 kPa and rotational speed of 250 rpm with flux of 176.8 L m−2 h−1 and rejection of 83% was selected as an optimum process condition. The analysis of fouling models revealed that the cake filtration model provided the highest R2 (0.89) value followed by intermediate pore blocking (0.87) which indicates that cake filtration model has the best fit with the experimental data. Henceforth, the shear enhanced filtration process used in this study can be considered as a pertinent filtration process for efficient recovery of biological products at industrial scale.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.