Abstract
A new method for the separation, pre-concentration and accurate determination of trace amounts of Pb and Cd in water samples using Amberlite XAD-16 resin functionalized with a new chelating ligand, 3-(2-hydroxyphenyl)-1H-1,2,4-triazole-5(4H)-thione (HTT), Amberlite XAD-16-HTT and inductively coupled plasma atomic emission spectrometry (ICP-AES) is reported in the present study. Fourier transform infrared (FTIR) spectroscopy was used to characterize the chelating resin. The effects of analytical parameters such as the pH of the medium, amount of adsorbent, type and volume of eluent, flow rate of the sample solution, volume of the sample solution, and matrix interference on the retention of metal ions were investigated. Also, 1 M HNO3 was used for the elution of the sorbed metals, and ICP-AES was used for the analysis of elutes offline. The results indicate that pH 5 is the optimum pH for the sorption of Pb and Cd ions. The limit of detection was found to be 0.16 and 0.22 μg/L for Pb and Cd, respectively, by applying a pre-concentration factor of 50. The method was validated using the international water reference material (NIST 1643e). The developed enrichment method has a high selectivity, sensitivity, and reproducibility; this method was successfully applied for the determination of Pb and Cd in surface water samples collected in Nellore District, Penner River belt as well as Bay of Bengal, Andhra Pradesh, India.
Highlights
The pollutants in ground and surface waters need to be regularly monitored to meet legislative requirements [1]
The structure of the functionalized Amberlite XAD-16-HTT was confirmed by Fourier transform infrared (FTIR) analysis
We investigated the effect of sample volume on the elution of Pb and Cd by choosing different volumes of water in the range 100–1000 mL (Amberlite XAD-16-HTT resin 500 mg)
Summary
The pollutants in ground and surface waters need to be regularly monitored to meet legislative requirements [1]. Many organic and inorganic toxic compounds have been designated as priority pollutants, and their accurate measurement is necessary to ensure drinking water quality. Toxic metals enter the human body via the food chain and drinking water, causing health problems [2]. Metals 2017, 7, 240 of these metals is detrimental to human health. High levels of Cd affects the functioning of the kidney and liver, whereas Pb could damage the testes, the brain and other vital body organs through oxidative stress [3]. An accurate determination of heavy metals such as Pb and Cd in water samples at trace levels is of paramount importance to monitor drinking water quality
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.