Abstract
Abstract A series of analyses were conducted on samples of an austenitic type 304 stainless steel that exhibited a high degree of sensitization (DOS) after being subjected to a solution annealing treatment at 1050°C. The DOS was detected by electrochemical potentiokinetic tests. Examination by scanning electron microscopy of etched samples revealed the presence of δ-ferrite within the austenitic matrix, and of the segregation of chromium and nickel in either phase; images obtained by atomic force microscopy revealed localized attack at the austenite/δ-ferrite interface. It was found that the DOS and the ferrite number of the steel were reduced as the material was held at the solution temperature for longer times. Aging at 650°C showed precipitation of chromium carbides at grain boundaries and at the austenite/δ-ferrite interface; this treatment increased the DOS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.