Abstract
Abstract This work investigates the influence of sensitization conditions on pitting corrosion resistance of ferritic stainless steel UNS S43000 aged at 800°C between 10 min and 320 min. UNS S43000 steel is susceptible to intergranular corrosion after solution treatment at 1,160°C followed by water-quenching, as a consequence of the chromium depletion of the grain boundaries adjacent areas, due to chromium carbide precipitation during cooling. Isothermal treatments of 10 min at 800°C decrease the sensitization degree, and intergranular corrosion resistance is recovered after 20 min at 800°C. The solution-treated specimens have a high pitting potential in 3.5% sodium chloride (NaCl) solution compared to the same material treated at 800°C for 10 min. The resistance to pitting corrosion is reduced by chromium depletion associated with an increase of inter- and intragranular precipitation of chromium carbide. For treatments longer than 20 min at 800°C, the pitting corrosion resistance returns to the high leve...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.