Sensitivity analysis of operation parameters of the salt cavern under long-term gas injection-production

Abstract

Injection-production operation parameters, the minimum injection gas pressure (IGP: operation pressure), IGP interval, minimum IGP residence time, and injection-production cycle of the underground salt rock gas storage under long-term operation, affect not only the capacity and working ability of a salt cavern but also be crucial to the safety and stability of the surrounding rock. A 3D geo-mechanical model of the salt cavern is established to study the stability of the storage in the operation period. The deformation, expansion safety factor, volume shrinkage, and plastic zone are comprehensively considered for predicting the feasibility and stability of the salt cavern. The stability of the surrounding rock of the cavern with different injection-production parameters and the impact of each parameter on the stability of the cavern during operating are systematically investigated. The results indicate that the displacement, the expansion coefficient of the surrounding rock, and the volume shrinkage rate of the salt cavern reduces significantly with the increment of IGP interval and minimum IGP, while they increases with raising the minimum IGP residence time and injection-production cycle. With the continuous operation of the cavity, the displacement and the volume shrinkage rate enhances significantly year by year with the augment of operation parameters, moreover, their value show a fluctuating upward trend with the alternation of the gas injection and the production. The volume of the plastic zone is enlarged with the increment of the IGP interval, minimum IGP, and injection-production cycle, while it reduces with the extension of the minimum IGP residence time. The variation becomes remarkably with the augment of parameters. The sensitivity coefficients of each injection-production operation parameter are ranked, from large to small, as follows: IGP interval, minimum IGP, minimum IGP residence time, injection-production cycle. The results can offer beneficial reference for effectively optimize the injection-production parameters, so as to provide technical guidance for ensuring the stability of the storage and meeting requirements for the storage capacity.