Abstract
According to the mechanism of thermal system modelling method, the implanting the health factors is adopted, the steady state non-1inear performance deterioration model is founded by integrating experience performance with thermodynamics theory. Considering the low-pressure compressor suffer from fouling, the performance deterioration of gas turbine is simulated based on the temperature-control of outlet of combustion chamber. The measurement parameters of variation are obtained; the mechanism and sensitivity of the change are defined. The results illustrate that the outlet pressure of the low-pressure compressor is degenerated obviously, so can be well-monitor sensors. The deterioration of low-pressure shaft speed is strong non-1inear decreased vs. the fouling increased. Thanks to the cooling for air of outlet of low-pressure compressor by intercooler, in conjunction with the power decreased of low-pressure turbine, the temperature of outlet of low-pressure compressor is have not bad influence on the high-pressure compressor. So the temperature without severe cast down, it is not fine for health monitor.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.