Sensitivity Analysis of Depth-Controlled Oriented Perforation in Horizontal Wells Based on the 3D Lattice Method

Abstract

The main method used to exploit unconventional oil and gas reservoirs involves multi-cluster perforation combined with hydraulic fracturing in horizontal wells. However, as the use of this technology has expanded, challenges like reduced perforation efficiency and elevated fracture initiation pressure have surfaced. The depth-controlled oriented perforation technique helps achieve uniform fracture initiation, enhance efficiency, and lower initiation pressure. In this study, a hydraulic fracturing fluid–solid coupling model at the perforation scale was established using the 3D lattice method to compare the near-wellbore fracture morphologies of depth-controlled oriented perforation, spiral perforation, and oriented perforation. Additionally, this study analyzes the effects of injection rate, reservoir elastic modulus, and horizontal stress difference on the fracture morphology and initiation pressure of depth-controlled oriented perforation. This study clarifies the applicability of depth-controlled oriented perforation in different types of reservoirs for the first time. The results indicate that intermediate fractures between spiral and oriented perforations are hindered, while depth-controlled oriented perforation ensures uniform fracture initiation. In the injection rate range of 0.144 to 0.360 L/min, an increase in injection rate accelerates the rise of fluid pressure within the perforations, leading to an increase in fracture initiation pressure. Therefore, excessively high injection rates are unfavorable for fracture initiation. Through depth-controlled oriented perforation, long and singular fractures can be formed in reservoirs with significant horizontal stress differences and high elastic moduli.