Abstract
The prediction of dams breach geometry crucial in studies of dam breaking. The hydrographs characteristics of flood that resulting from breaking of dam is mainly depend on the geometry of breach and the time formation of breach. Five approaches (Froehlich, Macdonald and Langridge-Monopolis, Von thun & Gillete, USBR and Singh % Snorrason) was used in order to predict dam breach parameters (breach width, breach side slope, breach formation time). The Sensitivity analysis was performed in order to assess the effect of each parameter on the resulting hydrograph of the flood. HEC-RAS model was used to calculate the effect of each parameter on the hydrograph of the flood that resulted. The width of breach (Bavg), side slope (z) and formation time of breach (tf) increased by 25%, 50%, 75% and 100% and decreased by 25%, 50% and 75%, respectively. Flood hydrograph was estimated at the dam site for each case. Sensitivity analysis was performed in order to check the effect of each parameter of breach and time of breaching. Sensitivity analysis was performed with Froehlich method with the mode of overtopping failure and maximum operating level at 107.5 meter above sea level. Result of sensitivity analysis show that peak discharge and time to reach it is adequately sensitive to breach side slope, highly sensitive to the breach formation time and less sensitive to breach width.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
