Sensitivity Analysis and Optimization of Heat Transfer Performance of Ultra-Thin Vapor Chamber With Composite Wick

Abstract

Abstract An ultra-thin vapor chamber (VC) with the composite wick formed by four spiral woven meshes (SWMs) and a copper mesh was proposed to solve the heat dissipation problem in miniaturized electronic equipment because of its sufficient heat transfer capability under limited thickness. However, the influence factors on the thermal performance of the VC with composite wick are more than that of the VC with a single type of wick. In this study, in order to investigate the thermal performance of the VC with composite wick, a theoretical model was developed to calculate the maximum heat transfer capacity. Besides, a three-dimensional numerical model for the heat transfer characteristics was established, and the simulation results have a good match with the experimental results. The orthogonal test method was adopted to determine that both the width of the vapor channel (wv) and the thickness of the vapor channel (tv) have a significant effect on the maximum heat transfer capacity and thermal resistance, while the porosity of the mesh (εmesh) has a prominent effect on the maximum heat transfer capacity, but has little effect on the thermal resistance. Further optimization of the sensitive factors for VC heat transfer performance was achieved to enhance the maximum heat transfer capacity.