Sensing Cellular Metabolic Activity via a Molecular-Controlled Semiconductor Resistor.

Abstract

Over the last decade, we have developed a molecular-controlled semiconductor resistor (MOCSER) device that is highly sensitive to variations in its surface potentials. This device was applied as a molecular sensor both in the gas phase and in solutions. The device is based on an AlGaAs/GaAs structure. In the current work, we developed an electronic biosensor for real-time, label-free monitoring of cellular metabolic activity by culturing HeLa cells directly on top of the device’s conductive channel. Several properties of GaAs make it attractive for developing biosensors, among others its high electron mobility and ability to control the device’s properties by proper epitaxial growing. However, GaAs is very reactive and sensitive to oxidation in aqueous solutions, and its arsenic residues are highly toxic. Nevertheless, we have managed to overcome this inherent chemical instability by developing a surface-protecting layer using polymerized (3-mercaptopropyl)-trimethoxysilane (MPTMS). To improve cell adhesion and biocompatibility, the MPTMS-coated devices were further modified with an additional layer of (3-aminopropyl)-trimethoxysilane (APTMS). HeLa cells were found to grow successfully on these devices, and MOCSER devices cultured with these cells were stable and sensitive to cellular metabolic activity. The sensitivity of the MOCSER device results from the sensing of extracellular acidification in the microenvironment of the cell-MOCSER interspace. We have found that this sensitivity is maintained only when the device is partially covered with the cellular layer, whereas at full coverage the sensitivity is lost. This phenomenon is related to the negatively charged cellular membrane potentials that lead to a reduction in the channel’s conductivity. We propose that the coated MOCSER device can be applied for real-time and continuous monitoring of cellular viability and activity.