Abstract

Increasing the efficiency of gas production from marine gas hydrate still faces significant problems. Based on the geological survey of marine reservoirs, gas hydrates are generally associated with underlying free gas layers with high temperature and water saturation. Here the effect of this gas layer and its characteristics on the gas and water production from the hydrate layer are studied. It was found that a large temperature difference existed between the two layers during gas production due to the different heat demand and consumption in each layer. Slower gas production rate was observed in case of dense distribution of hydrates in the hydrate-bearing layer and the resulting sluggish gas permeation and enormous heat supply. Notably, this was not present when the free gas layer was more water-saturated. The resulting maximum gas production rate could be effectively enhanced by 41 % at most as well. This was attributed to the increased sensible heat available from the pore water and the interbedded heat exchange. It was thus indicated that a hydrate reservoir with an underlying water-rich layer could be more favorable for gas production in terms of heat supply.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.