Abstract

Recognizing the growing interest in the application of organic photovoltaics (OPVs) with greenhouse crop production systems, in this study we used flexible, roll-to-roll printed, semi-transparent OPV arrays as a roof shade for a greenhouse hydroponic tomato production system during a spring and summer production season in the arid southwestern U.S. The wavelength-selective OPV arrays were installed in a contiguous area on a section of the greenhouse roof, decreasing the transmittance of all solar radiation wavelengths and photosynthetically active radiation (PAR) wavelengths (400–700 nm) to the OPV-shaded area by approximately 40% and 37%, respectively. Microclimate conditions and tomato crop growth and yield parameters were measured in both the OPV-shaded (‘OPV’) and non-OPV-shaded (‘Control’) sections of the greenhouse. The OPV shade stabilized the canopy temperature during midday periods with the highest solar radiation intensities, performing the function of a conventional shading method. Although delayed fruit development and ripening in the OPV section resulted in lower total yields compared to the Control section (24.6 kg m−2 and 27.7 kg m−2, respectively), after the fourth (of 10 total) harvests, the average weekly yield, fruit number, and fruit mass were not significantly different between the treatment (OPV-shaded) and control group. Light use efficiency (LUE), defined as the ratio of total fruit yield to accumulated PAR received by the plant canopy, was nearly twice as high as the Control section, with 21.4 g of fruit per mole of PAR for plants in the OPV-covered section compared to 10.1 g in the Control section. Overall, this study demonstrated that the use of semi-transparent OPVs as a seasonal shade element for greenhouse production in a high-light region is feasible. However, a higher transmission of PAR and greater OPV device efficiency and durability could make OPV shades more economically viable, providing a desirable solution for co-located greenhouse crop production and renewable energy generation in hot and high-light intensity regions.

Highlights

  • With the air temperature being relatively consistent across the organic photovoltaics (OPVs) and Control sections, the relative differences in crop performance can be attributed mainly to the deployment of OPV on the greenhouse roof, and other environmental factors related to the OPV shade treatment

  • This study demonstrated the application of commercially manufactured, semi-transparent, flexible, roll-to-roll printed organic photovoltaic (OPV) arrays (3.4 m2 active area) as a shade element for greenhouse tomato production in a hot, arid climate

  • During the hottest months of the measurement period (May–July), the OPV shade provided a suitable climate for tomato crop production, stabilizing canopy temperature during the times of day with the highest solar radiation intensities, performing the function of a conventional shading method

Read more

Summary

Introduction

Greenhouse-integrated photovoltaic (PV) technologies are increasingly seen as a promising solution for sustainable greenhouse agriculture. Higher annual yields and lower water consumption compared to conventional farming make greenhouse production attractive for space-limited and water-limited regions. The climate control systems and other electrical components involved in greenhouse operations consume large amounts of energy [1,2]. PV systems that are structurally integrated with the greenhouse enable the co-production of renewable energy and crops on the same land footprint, which is advantageous from a resource-use efficiency perspective [3]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call