Semi in-situ investigations on deformation-induced micro-damage in high-strength dual-phase steels

Abstract

This work investigates deformation-induced micro-damage modes in ferrite-martensite dual-phase (DP) steels utilizing a state-of-the-art semi in-situ deformation apparatus integrated with scanning electron microscope. By integrating secondary electron imaging, electron backscatter diffraction, and electron channeling contrast, we provide comprehensive statistical results on micro-damages and strain localization events of their formation in DP780 and DP980 steels. The current observations indicate that interface decohesion plays a critical role in DP780, particularly under plastic instability. Based on maps of Kernel averaged misorientation, interface decohesion arises from the accumulation of geometrically necessary dislocations, which serve to compensate for the deformation incompatibility between ferrite and martensite. In contrast, the dominant damage mode in DP980 under plastic instability involves ferrite cracking within martensite-surrounded ferritic grains. This type of micro-damage is a result of strain localization by shear bands that accommodate the global deformation while the grain is constrained by martensite islands. Martensite cracking does not show as predominate sites under the condition of plastic instability in both steels. In summary, our findings highlight the importance of deformation incompatibility and constraint on occurrence of micro-damages through distinct strain localization events, which are determined by both microstructure of damage site and its environmental microstructure. In this work, we shed light on the role of microstructural engineering as a critical strategy for enhancing the resistance of DP steels or hetero-phase steels against deformation-induced damage.