Semi-active vibration control of a rotating flexible plate using stiffness and damping actively tunable joint

Abstract

Lighter structures are increasingly required for flexible spacecraft. However, low frequency and large amplitude vibration problems are unavoidable due to external disturbances or attitude maneuvering especially when working under a microgravity environment. Therefore, a new methodology involving a semi-active technique using an actively tunable joint with variable stiffness and damping control, capable of handling such issues is proposed in this study. The incentive active joint was conceived with a compact structure, based on the electromagnetic direct drive principle. First, a dynamic model of rotating flexible plate was established. Then, a prototype was fabricated and tested. Finally, on the one hand, numerical simulations and experimental results indicated that, when the joint torsional stiffness changed, a frequency shift phenomenon occurred. On the other hand, two types of noncontact periodic vibration excitation methods along the rotation direction were proposed and the experimental results validated that the major frequency bandwidth of interference signal was 0.08–0.52 Hz with a significant vibration attenuation of 5.5–31.5 dB in effective bandwidth. Moreover, in the low frequency range (0.08–0.43 Hz), variable damping was found to be the main factor and variable stiffness was the secondary factor. However, in the high frequency range (around 0.52 Hz), variable stiffness was dominant and variable damping was inferior. These findings are expected to effectively suppress the low frequency and large amplitude vibration of solar panels with flexible joints.