Abstract
A self-induced Q-switched erbium-doped fiber laser operating at 1563 nm was achieved by integrating a passive modulator based on tantalum aluminum carbide (Ta2AlC) MAX phase film embedded into polyynyl alcohol. The modulator, serving as a saturable absorber (SA), established a modulation depth of 9% and a saturation intensity of 0.3 MW cm−2. Upon integration of the film SA, a stable Q-switched fiber laser was obtained, generating pulses with a minimum width of 7.6 µs at a repetition rate of 45.1 kHz, within a pump power range of 24.9–59.7 mW. The corresponding maximum average output power, maximum pulse energy, and highest peak power were determined at 1.6 mW, 36.2 nJ, and 4.7 mW, respectively. The RF fundamental spectrum exhibited a good signal-to-noise ratio of 61 dB, indicating excellent pulse signal quality. This demonstration of Ta2AlC MAX phase film Q-switched laser may open promising possibilities for scientific applications such as material processing.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
