Self-healing concrete: efficiency evaluation and enhancement with crystalline admixtures

Abstract

Self-healing materials are materials with the capability to repair their damage autonomously or with minimal help from an external stimulus. In the construction field, the development of self-healing elements will increase the durability of structures and reduce their maintenance and repair actions. Reinforced concrete elements frequently suffer small cracks (< 0.3 mm), not relevant mechanically, but they can be an entrance point for aggressive agents. Concrete has a natural self-healing capability able to seal small cracks, produced by the continuing hydration and carbonation processes. Recent studies have attempted to improve that healing capability and to design specific products to achieve it. These products include, among others: crystalline admixtures, micro- or macro-encapsulated agents, and even the use of bacteria. Crystalline admixtures (CA) are a concrete admixture that is claimed to provide self-healing properties. However, the lack of knowledge on their behavior and self-healing properties limits their usage. In addition, the methods to evaluate the self-healing capability of mortar and concrete are not standardized yet. This complicates the performance of a critical analysis of the different self-healing products and evaluation methods found in the literature. In order to answer to this lack of knowledge, the objectives of this thesis are: 1) to study and propose experimental procedures in order to evaluate self-healing in concrete and, 2) to evaluate experimentally the self-healing enhancements produced when introducing crystalline admixtures. This thesis includes the following tests for the determination of the self-healing: the evaluation of crack closing, water permeability, three point bending tests and capillary absorption test. In addition, several experimental campaigns have been performed with the objective of validating the proposed tests. Afterwards, these methods have been used to analyze the influence of several parameters, including among others: the presence of crystalline admixtures, the damage extent, healing time needed, concrete composition and healing conditions. Finally, the effects that crystalline admixtures produce in concrete are analyzed in terms of slump, strength and hydration. The results show that crack closing is an effective and simple method to evaluate self-healing. However, the orientation of the crack during healing is of great importance, and disregarding this aspect may lead to misleading conclusions. The water permeability method proposed in this work has good stability and it is easy to implement in concrete laboratories. Moreover, the relations obtained between crack parameters and water permeability confirmed the cubic relation, as reported in the literature. This work shows that analyzing healing efficiency by means of crack closing tends to overestimate self-healing if compared with the results obtained by means of water permeability. Sorptivity analysis tests were easy to implement, however, the results obtained in this work showed high dispersion and sensitivity to the variations of the cracks introduced during the precracking process. Regarding the evaluation of mechanical recoveries, the results show that the evolution of concrete properties with time is a parameter of importance that, therefore, should be considered, especially for early age cracks. In this work, crystalline admixtures have been reported as an enhancer of self-healing reactions, but with a limited capacity of enhancement. The proximity of CA to the industry is a positive point to their inclusion as a new type of admixture for concrete. However, the results obtained in this thesis indicate further analyses are needed to determine their full effects on concrete, especially regarding self-healing.