Self‐similar turbulent boundary layer in pressure gradient

Abstract

AbstractSelf‐similar flows in a turbulent boundary layer when the free‐stream velocity is specified as a power function of longitudinal coordinate are investigated. The self‐similar formulation not only simplifies solving of the problem by reducing the equations of motion to ordinary differential equations but also provides a mean for formulating closure conditions. It is shown that for the class of flows under consideration that depend on three governing parameters the dimensionless mixing length is a function of the normalised distance from the wall and the exponent in the law specifying the free‐stream velocity distribution in the outer region and a universal function of local Reynolds number in the wall region, the latter corollary being true even when the skin friction vanishes. In calculations this function is set to be independent of pressure gradient, which gives the results very close to experimental data.There exist four different self‐similar flow regimes. Each regime is related to its similarity parameter, one of which is the well‐known Clauser equilibrium parameter and the other three are established for the first time. In case of adverse pressure gradient when the exponent lies within certain limits, which depend on Reynolds number, the problem has two solutions with different values of the boundary layer thickness and skin friction, which points out the possibility of hysteresis in near‐separating flow. Separation occurs not at the minimum value of the exponent that corresponds to the strongest adverse pressure gradient but at a higher one whose dependence on Reynolds number is calculated in the paper. The results of the theory are in good agreement with experimental data. (© 2011 Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim)