Abstract
Abrasive composite bulks consisting of polycrystalline cubic boron nitride (PCBN) grains, Cu-Sn-Ti alloy and graphite particles were sintered at the heating temperature of 920 °C for the dwell time of 30 min. The bending strength of abrasive composite bulks was measured. The interfacial microstructure and the phases were characterized. In addition, the dressing experiment was carried out to detect the self-sharpening behavior of the composite bulks. Results obtained show that the abrasive composite bulks in this investigation give higher bending strength than that of the vitrified abrasive wheels. The compounds of TiN, TiB2were formed and the PCBN grains were embedded firmly. Strong fixing of the bulks to the PCBN grains led to the breakage of the PCBN grains when the abrasive composite bulks fractured. The intergranular fracture mode of the PCBN grains ensured the self-sharpening effect of the grains.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
