Abstract
Blends of ethylene acrylic elastomer (AEM) and thermotropic liquid crystalline polymer (TLCP) have been prepared by melt mixing technique. Processing studies indicated a decrease in the viscosity of the blends with the addition of liquid crystalline polymer (LCP). At lower level of LCP the tensile strength and tear strength increased. However, at higher level of LCP tensile strength values decreased due to insufficient adhesion between two phases. The modulus of the samples increased with the LCP content. The degree of crystallinity increased with increasing LCP content. This improvement in crystallinity is associated with the increase in crystallite size. For the blends, thermal studies indicated, the endothermic signals which were more prominent at all the peak temperatures. The heat of degradation values increased with the LCP content. Scanning electron microscope (SEM) study suggested the fibril formation, which affected the failure mechanism under DMA studies. Storage modulus and loss modulus of the blends increased with increasing LCP content. At above glass transition temperature (Tg) improvement in storage modulus is nearly five times higher than that of the pure AEM.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
