Self-referencing photothermal digital holographic microscope for characterization of low-loss liquids

Abstract

Measurement of absorption coefficients of transparent samples is important for their characterization and identification; however, it is challenging to measure low values, e.g., 10−3–10−4 cm−1 with high accuracy. Here, we report a compact photothermal lateral shearing digital holographic device. It is based on the thermal lens effect and a common-path, self-referencing digital holographic microscope comprising a glass plate, probe beam, and a CMOS camera. The change in phase distribution caused by the temperature change due to light absorption is measured from the recorded holograms to extract the sample's absorbance and absorption coefficient. The feasibility of the proposed configuration is validated by the experimental results obtained with different concentrations of gold nanoparticles (AuNPs) in an aqueous solution. Determination of AuNPs concentration in the nM range is performed, and the obtained limits of detection and quantitation are 0.04 nM and 0.13, respectively. The calibration curve is linear at a low concentration range of 0.06–0.95 nM with 1% reproducibility. In addition, the method's versatility is demonstrated by measuring the absorption coefficient of low-loss solvents, such as ethanol and water. The determined absorption coefficients agree with the reported values, confirming that this method provides good spectrometric capabilities, such as high sensitivity and accuracy.