Self‐Powered Supercapacitor with Bifunctional Separator in Suppressing Self‐Discharge

Abstract

AbstractIntegrating energy harvesters with energy storage devices helps enhance energy utilization efficiency. The requirement for external power sources in energy storage devices can also be addressed by the development of an all‐in‐one single system. Vegetable peels can be used as piezoelectric energy harvesters due to the generation of electric dipole within cellulose. The self‐discharge processes cause open circuit potential decay, resulting in a loss of energy stored within the cell. The self‐discharge rate can be controlled by using a piezoelectric separator. This work used garlic skins as a piezoelectric separator, which helped delay the self‐discharge rate. The supercapacitor using Ni−Mn oxide as positive and Fe−Ni sulfide/RGO as negative electrode materials was fabricated with garlic skin as a separator. The device was charged from an initial OCP of ~0.15–~0.37 V in ~ 4 sec by finger tapping. The OCP decay rate was reduced by~88 % compared to that of using the Whatmann separator. The fabricated Ni−Mn oxide RGO/garlic skin/FeS2 RGO exhibited ~72.2 W h kg−1 energy density at a power density of ~2 kW kg−1 in an operated potential window of ~2 V. This research provides a cost‐effective method for developing piezoelectric supercapacitor with low self‐discharge rate.