Abstract

Rational engineering of atomically scaled metal-nitrogen-carbon (M-N-C) moieties has been the topic of recent research interest because of their potential application as an electrochemical oxygen reduction reaction (ORR) catalyst. Despite numerous efforts on M-N-Cs, attaining both adequate activity and a satisfactory stability simultaneously is a principal issue. Herein, we demonstrated the synthesis of a single-atom tungsten catalyst supported on the N-doped carbon matrix (W-N-C) and its application as an ORR catalyst. W-N-C was synthesized using the economically viable, simple, one-step pyrolysis of dicyandiamide and tungsten(VI) chloride at moderate temperature (700 °C). The synthesis of W-N-C avoids any post acid treatment as it does not require any subsidiary sacrificial metal like Zn and, hence, does not induce any burden associated with chemical waste management. The atomic dispersion of W atoms stabilized by N-doped porous carbon and the formation of WN2C2 were confirmed by high-angle annular dark-field scanning transmission electron microscopy and X-ray absorption spectroscopy. Interestingly, as-synthesized WN2C2 exhibited unprecedented electrocatalytic activity with a half-wave potential of 764 mV vs reversible hydrogen electrode (RHE) as well as significantly enhanced stability (retaining >99% diffusion-limited current density and the loss in activity is 10.5% at 0.84 V after 10,000 potential cycles), which is much better than the stability limit set by the US Department of Energy in an alkaline medium. Overall, the activity of W-N-C surpasses that of Pt/C after 5000 cycles. The excellent stability is believed to be due to the symmetric coordination of the metal active site (W2N2C2).

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call