Abstract
Combining optical microscopy, synchrotron X-ray diffraction and ellipsometry, we studied the internal structure of linear defect domains (oily streaks) in films of a smectic liquid crystal 8CB with thicknesses in the range of 100-300 nm. These films are confined between air and a rubbed PVA polymer substrate which imposes hybrid anchoring conditions (normal and unidirectional planar, respectively). We show how the presence or absence of dislocations controls the structure of highly deformed thin smectic films. Each domain contains smectic layers curved in the shape of flattened hemicylinders to satisfy both anchoring conditions, together with grain boundaries whose size and shape are controlled by the presence of dislocation lines. A flat grain boundary normal to the interface connects neighboring hemicylinders, while a rotating grain boundary (RGB) is located near the axis of curvature of the cylinders. The RGB shape appears such that dislocation lines are concentrated at its summit close to the air interface. The smectic layers reach the polymer substrate via a transition region where the smectic layer orientation satisfies the planar anchoring conditions over the entire polymer substrate and whose thickness does not depend on that of the film. The strength of planar anchoring appears to be high, larger than 10(-2) mJ m(-2), compensating for the high energy cost of creating an additional 2D defect between a horizontal smectic layer and perpendicular ones of the transition region. This 2D defect may be melted, in order to avoid the creation of a transition region structure composed of a large number of dislocations. As a result, linear defect domains can be considered as arrays of oriented defects, straight dislocations of various Burger vectors, whose location is now known, and 2D nematic defects. The possibility of easy variation between the present structure with a moderate amount of dislocations and a structure with a large number of dislocations is also demonstrated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have