Self-Motion of Water Droplets along a Spacing Gradient of Micropillar Arrays on Copper.

Abstract

Self-driven droplet transport along an open gradient surface is increasingly becoming popular for various microfluidics applications. In this work, a gradient copper oxide layer is formed on a copper sheet (as a bipolar electrode, BPE) in a KOH solution by bipolar electrochemistry. The deposits at different positions present a rich variety of colors, compositions, and microstructures along the longitudinal axis of the BPE. More than half the length of the anodic pole is covered by a Cu(OH)2/CuO composite layer of several micrometers thick, which is composed of dense micropillars with a decreasing spacing gradient to the anodic direction. The micropillar arrays are superhydrophilic, and after modified with 1-dodecanethiol, the tops of the dense micropillars constitute a hydrophobic and microscopically discontinuous surface with a wettability gradient. On such a gradient surface water droplets can move spontaneously to more hydrophilic direction at a velocity of about 16 mm s-1. The superhydrophobicity of the modified micropillar arrays is discussed through a comparison with the wax tubules on a lotus leaf. Theoretical analysis of the driving force reveals that the concave surface effect of water at the spacings between the micropillars is the critical factor for driving the rolling motion of the droplets along the gradient micropillar arrays.