Abstract

A procedure for the speciation of arsenic(III) and arsenic(V) in natural water samples has been established in the presented work. Arsenic(III) ions were quantitatively recovered on Alternaria solani coated Diaion HP-2MG resin at pH 7, while the recoveries of arsenic(V) was below 10%. Arsenic(V) in the mixing solution containing As(III) and As(V) was reduced by using KI and L(+) ascorbic acid solution, then the procedure was applied to determination of total arsenic. Arsenic(V) was calculated as the difference between the total arsenic content and As(III) content. The determination of arsenic was performed by using hydride generation atomic absorption spectrometry. The influences of some alkali, earth alkali and transition metals on the biosorption of arsenic(III) were investigated. The preconcentration factor was 35. The detection limits for As(III) ( N = 20, k = 3) was found as 11 ng L −1. The relative standard deviation and relative error of the determinations were found to be lower than 7% and 4%, respectively. The accuracy of the method was confirmed with certified reference materials. The method was successively applied for the determination and speciation of inorganic arsenic in water, food and biological samples.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call