Abstract
In the present study, organic acids - oxalic acid, citric acid, tartaric acid and siderophore Desferrioxamine B were evaluated for their efficiencies to selectively recover Cu from its mold production waste. XRD analysis showed that copper mold production waste mainly consisted of Fe and Cu. The complete dissolution of this waste in aqua regia and subsequent analysis via ICP-MS revealed metal contents of 355.3 mg/g Fe and 293.9 mg/g Cu. Among all the organic acids, citric acid had the highest leaching efficiency (58.5 %) for Fe while leaching <1 % of Cu. Whereas, the leaching of Cu and Fe was poor in oxalic acid medium and Cu leaching was also negligible in tartaric acid medium. Only Fe showed 11.2 % leaching efficiency at 2 mol/L tartaric acid. The step-by-step leaching of production waste with citric acid lead to 100 % leaching of Fe while leaving 93.1 % of Cu with a yield of >99 % in the solid residue in the 4th step. Further, the siderophore Desferrioxamine B could effectively leach Fe (91.2 %) while 21.4 % leaching of Cu in 30 days. The presence of Fe impedes the leaching of Cu from the waste as demonstrated by leaching and DFT calculations due to higher stability of Fe-citrate and Fe-desferrioxamine B complex compared to Cu-organic complexes. This recycling technique described herein is simple, reliable and environmentally friendly for recovery of Cu from copper mold production waste.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
