Abstract
A comparative study on the selective oxidation and the ammoxidation of propane on a Mo–V–Te–Nb–O mixed oxide catalyst is presented. The catalyst has been prepared hydrothermally at 175 °C and heat-treated in N 2 at 600 °C for 2 h. Catalyst characterization results suggest the presence mainly of the orthorhombic Te 2 M 20O 57 ( M = Mo, V and Nb) bronze in samples before and after use in oxidation and ammoxidation, although some little modifications have been observed after its use in ammoxidation reaction. Propane has been selectively oxidized to acrylic acid (AA) in the 340–380 °C temperature range while the ammoxidation of propane to acrylonitrile (ACN) has been carried out in the 360–420 °C temperature interval. The steam/propane and the ammonia/propane molar ratios have an important influence on the activity and the selectivity to acrylic acid and acrylonitrile, respectively. The reaction network in both oxidation and ammoxidation reactions as well as the nature of active and selective sites is also discussed. The catalytic results presented here show that the formation of both ACN and AA goes through the intermediate formation of propene.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
