Abstract
Calcification roasting is a clean way to extract vanadium from the vanadium slag. But the subsequent sulfuric acid leaching brings the impurity of phosphorous into the leach liquor of vanadium and thus inhibits the precipitation of vanadates for vanadium recovery. In this paper, a novel selective leaching method using ammonium carbonate ((NH4)2CO3) has been proposed for the extraction of vanadium in the calcification-roasted vanadium slag. The (NH4)2CO3 leaching can dissolve calcium vanadates with high selectivity while maintaining other impurities including phosphorous in the solid residue. Ammonium vanadate can be precipitated directly by cooling down without pH adjustment or ammonium salt addition, which makes the (NH4)2CO3 leaching cost-effective. The waste water after precipitation can be recycled back to the leaching circuit, showing the friendliness of (NH4)2CO3 leaching method to the environment. With (NH4)2CO3 leaching, 96.0% of vanadium can be dissolved while the corresponding leaching efficiency of phosphorous is 9.2% using the most suitable condition of solid/liquid ratio 1:20, particle size 45–74μm, leaching temperature 80°C, (NH4)2CO3 concentration 600g/L and leaching time 70min. This work has laid the foundation for the industrial application of ammonium carbonate leaching and provided new insights into selective leaching of valuable elements in complex minerals.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.