7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.1116/1.3253532
Copy DOIPublication Date: Nov 1, 2009 | |
Citations: 10 |
Among the core extreme ultraviolet lithography (EUVL) technologies, mask fabrication is of considerable importance due to the use of new reflective optics having a completely different configuration from that of conventional photolithography. This study investigated the etching properties of attenuated phase-shift mask materials for EUVL, such as TaN (attenuator layer), Al2O3 (spacer), Mo (phase shifting layer), Ru (buffer/capping/etch-stop layer), and Mo–Si multilayer (reflective layer) by varying the Cl2∕Ar gas flow ratio, dc self-bias voltage (Vdc), and etch time in inductively coupled plasmas. For the fabrication of the attenuated EUVL mask structure proposed herein, the TaN, Al2O3, and Mo layers need to be etched with no loss of the Ru layer on the Mo–Si multilayer. The TaN and Al2O3 layers were able to be etched in BCl3∕Cl2∕Ar plasmas with a Vdc of −100V and the Mo layer was etched with an infinitely high etch selectivity over the Ru etch-stop layer in a Cl2∕Ar plasma with a Vdc of −25V even with increasing overetch time.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.