Abstract
Fast pyrolysis has appeared as a promising technology for bio-fuels and bio-based chemicals production. This paper reports tea waste (TW) as a promising source of phenolic-rich bio-oil production via catalytic fast pyrolysis in fluidized bed reactor. TG-FTIR analysis is applied to optimize pyrolysis temperature for phenolic-rich bio-oil production and maximum phenols yield (17.3 %) was obtained at 500 °C. Meanwhile, bio-oils are produced at each corresponding temperatures of TG-FTIR analysis and GC–MS analysis is performed to examine consistency and authenticity of TG-FTIR results. Moreover, catalytic effect of activated carbon + KOH (AC-K) with different biomass-to-catalyst ratio was examined to optimize most efficient ratio at 500 °C and maximum phenol contents (39.72 %) were obtained at 1:6 ratio of biomass-to-catalyst as compared to non-catalytic pyrolysis (23.85 %). Moreover, effect of temperature on product distribution was examined and maximum liquid yield (40.7 %) was obtained at 500 °C. Furthermore, switchable hydrophilic solvents (SHS) were used to isolate phenols from bio-oil with 95.02 % yield calculated by GC–MS analysis. The elemental analysis and high heating value (HHV) of the crude and residue bio-oil were determined. The carbon contents and HHV of residue bio-oil were increased to 67.3 % and 13.7 MJ/Kg from 46.2 % and 10.38 MJ/Kg respectively while; oxygen contents were decreased to 19.7 from 45.3 % demonstrating its potential for fuel application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.