Selection of spectrum- and seismo-compatible accelerograms for the Tuscany region in Central Italy

Abstract

This article illustrates the results of a study aimed at developing a methodology for the automatic identification of the seismic input at outcropping rock sites and flat topographic conditions necessary to carry out non-linear dynamic analysis of structures and geotechnical systems. The seismic input is provided in terms of a set of 7 natural accelerograms recorded on outcropping rock and satisfying the average spectral compatibility requirements prescribed by the Italian seismic code (NTC08).The study focuses on the territory encompassing Tuscany region in Central Italy and it has been carried out for six return periods, which are 50, 75, 101, 475, 712 and 949 years. The procedure involved four main steps: (1) grouping of the response spectra with similar features; (2) definition of the reference response spectrum for each group; (3) selection of spectrum-compatible accelerograms using the reference response spectrum of each group; and (4) linear scaling of the accelerograms to satisfy the compatibility requirement with respect to other response spectra of the group. The last step is implemented through an interactive, user-friendly program named SCALCONA 2.0, which provides the seismic input in agreement with the site location and return period specified by the user. The program is freely available at the following web site: http://www.rete.toscana.it/sett/pta/sismica/01informazione/banchedati/input_sismici/progettazione/index.htm.