Abstract
Bitumen modification with ethylene-vinyl acetate (EVA), in a wide range temperatures (between − 30 and 100 °C), has been studied as a function of polymer concentration and EVA characteristics (vinyl acetate (VA) content and melt flow index (MFI)). Viscous flow, dynamic shear (DSR) temperature sweep, and technological tests were conducted to assess binder performance at medium-to-high in-service temperatures. Evaluation of binder low-temperature viscoelastic behavior has been performed using a solid rectangular fixture (SRF) in torsional mode, either in the linear viscoelastic region or under non-linear conditions (by strain breakage tests between − 30 and 0 °C). Further microstructural analysis based on modulated differential scanning calorimetry (MDSC) and optical microscopy was conducted to support rheological and technological results. Hence, total crystalline fraction (related to the VA content and polymer concentration) turned out to be a key parameter to achieve a suitable binder modification at medium-high temperatures. In addition, MFI appears to be an important EVA parameter at low temperatures, as it was found that lower MFI values enhanced resistance to low-temperature cracking.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
