Abstract
The article was created as a result of the work of the TECHMATSTRATEG 1 “Modern Material Technologies” Program as part of the project with the acronym INNOBIOLAS entitled “Development of innovative working elements of machines in the forestry sector and biomass processing based on high-energy surface modification technologies of the surface layer of cast elements”; agreement No. TECHMATSTRATEG1/348072/2/ NCBR/2017.
Highlights
According to accepted international standards, the forest area in Poland is over 9.35 million hectares
Tools of the forestry sector should be characterized by high strength and plastic parameters, especially high impact toughness, as well as excellent tribological properties and corrosion resistance
The following thermal treatments were used for individual alloys: a) cast steel 30MCDB64-M: 1. variant 1: water quenching; low tempering, 2. variant 2: water quenching; high tempering, b) cast steel 30NSCDV86-M: variant 1: water quenching; tempering, variant 2: preliminary annealing; water quenching; double tempering, variant 3: preliminary annealing; quenching in oil; double tempering, The heat treated model alloys were subjected to a static tensile test, impact strength and hardness measurements as well as density measurements
Summary
Selection of Casting Materials for Working Parts of Machines for The Forestry Sector. To Cite This Article: Stanislaw Pysz, Piotr Wieliczko, Dorota Wilk Kolodziejczyk, Selection of Casting Materials for Working Parts of Machines for The Forestry Sector. Am J Biomed Sci & Res. 2021 - 11(6).
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
