Abstract
A seizure test particularly well suited to evaluate the mechanical strength of phosphate-stearate coatings has been developed. Test results, including tangential friction force and time at the onset of seizure, are related to the effective phosphate bonding and to lubricant reactive effects. It is shown that seizure is delayed if the phosphate coating is annealed at 500°C just before soaping. The γ-Zn3 (PO4)2 formation which occurs with a decrease in volume induces cracking along hopeite needles and causes an increase in reactive surface for soaping and, therefore, an increase in the quantity of zinc phosphate converted into zinc stearate. Improvement of the phosphate coating by annealing at 500°C before soaping may be an attractive alternative to the use of molybdenum disulfide lubricants.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.