Seismic wavefield reconstruction based on compressed sensing using data-driven reduced-order model

Abstract

SUMMARYReconstruction of the distribution of ground motion due to an earthquake is one of the key technologies for the prediction of seismic damage to infrastructure. Particularly, the immediate reconstruction of the spatially continuous wavefield is valuable for decision-making of disaster response decisions in the initial phase. For a fast and accurate reconstruction, utilization of prior information is essential. In fluid mechanics, full-state recovery, which recovers the full state from sparse observation using a data-driven model reduced-order model, is actively used. In this study, the framework developed in the field of fluid mechanics is applied to seismic wavefield reconstruction. A seismic wavefield reconstruction framework based on compressed sensing using the data-driven reduced-order model (ROM) is proposed and its characteristics are investigated through numerical experiments. The data-driven ROM is generated from the data set of the wavefield using the singular value decomposition. The spatially continuous seismic wavefield is reconstructed from the sparse and discrete observation and the data-driven ROM. The observation sites used for reconstruction are effectively selected by the sensor optimization method for linear inverse problems based on a greedy algorithm. The proposed framework was applied to simulation data of theoretical waveform with the subsurface structure of the horizontally stratified three layers. The validity of the proposed method was confirmed by the reconstruction based on the noise-free observation. Since the ROM of the wavefield is used as prior information, the reconstruction error is reduced to an approximately lower error bound of the present framework, even though the number of sensors used for reconstruction is limited and randomly selected. In addition, the reconstruction error obtained by the proposed framework is much smaller than that obtained by the Gaussian process regression. For the numerical experiment with noise-contaminated observation, the reconstructed wavefield is degraded due to the observation noise, but the reconstruction error obtained by the present framework with all available observation sites is close to a lower error bound, even though the reconstructed wavefield using the Gaussian process regression is fully collapsed. Although the reconstruction error is larger than that obtained using all observation sites, the number of observation sites used for reconstruction can be reduced while minimizing the deterioration and scatter of the reconstructed data by combining it with the sensor optimization method. Hence, a better and more stable reconstruction of the wavefield than randomly selected observation sites can be realized, even if the reconstruction is carried out with a smaller number of observations with observation noise, by combining it with the sensor optimization method.