Seismic site characterization using MASW and correlation study between shear wave velocity and SPT[sbnd

Abstract

A seismic site characterization study is carried out in the south of the foothills of tectonically active Himalayan region. During an earthquake, the dynamic characteristics of the shallow subsurface strata can influence seismic shaking in the region, causing damage to civil infrastructures. The seismic site characterization study with shear wave velocity (Vs) is performed using the Multi-channel Analysis of Surface Wave (MASW) technique, which is particularly challenging to implement in the densely inhabited areas. However, the standard penetration test (SPTN) commonly measured by civil engineers can be utilized to compute Vs of such areas by establishing a correlation between Vs and the SPT-N values.In the study area, MASW data were acquired at twelve different locations, whereas SPT-N tests were available from 26 boreholes. Twelve borehole locations closer to the MASW survey lines were paired to establish relationships between SPT-N and Vs. The developed linear and non-linear correlation functions were found to be statistically similar. Furthermore, the linear correlation function is used for estimating Vs from SPT-N in remaining 14 boreholes. The new correlation functions were further compared with previously reported empirical relationships from other areas. The current relationship can be used for geoengineering purposes at different sites with similar geological conditions.Shear wave velocity derived from the MASW surveys and estimated from the new empirical relationship was utilized for seismic site characterization based on average shear wave velocity up to 30 m depth (Vs30). The Vs30 map of the study site is prepared and classified in accordance with the National Earthquake Hazard Reduction Program (NEHRP-2020). The calculated Vs30 value of the study site ranges from 285 to 375 m/s. The major portion of the study area lies under Site Class CD, with a minor portion under Site Class D. In the event of an earthquake, some zones can potentially have stronger ground amplification, particularly in Site Class D and may have damaging effects. A series of average shear wave velocity maps for different depths are prepared to help geotechnical engineers in identifying and mitigating geotechnical risks. Furthermore, there are potential geohazard risks as certain depths show low shear velocity.