Abstract

This study is focused on the nonlinear behavior of ground-supported open top circular concrete tanks under the effect of seismic loads. The tank support conditions are considered in this study where both flexible and nonflexible supports are investigated. A comparison between the behavior of reinforced concrete (RC) and prestressed concrete (PC) tanks is undertaken for flexible base condition. The finite element (FE) method is used to study the nonlinear response of circular tanks under dynamic time-history and push-over analysis. Furthermore, the response modification factors (R) included in current practice are evaluated based on the results of nonlinear dynamic and push-over analysis. Several tank configurations with different aspect ratios, construction method, and base conditions are used in this study to attain reliable results and to validate the Rvalues. The behavior of circular RC tanks under shrinkage effect is also investigated. Moreover, an innovative approach is presented in this study for flexile base tanks in order to further reduce the seismic response of these structures by using passive energy dissipation systems such as fluid viscose dampers (FVD). The results of this study show that higher R-values could be applied to fixed base tanks as compared to hinged base tanks. Also, shallower concrete tanks can be assigned higher R-values as compared to tall tanks. The results of this study show that the type of construction affects the tanks ductility. PC tanks show lower ductility as compared to RC tanks. Furthermore, this study shows that the flexible base tanks with seismic cables do not dissipate the seismic forces, as expected, due to the elastic behavior of the seismic cables. Based on the results of the FE analysis, it is shown that, using FVD reduces the tank response under seismic loads. The use of FVD improves the tank serviceability by reducing the concrete cracking. It is concluded that flexible based tanks equipped with FVD can be used as an economically feasible system in high seismic zones.

Highlights

  • 1.1 General Liquid-containing structures (LCS) are important components in the commercial and industrial applications as they are used for storage water and other products such as oil and gas

  • This difference in results is due to the lumping effects of impulsive and convective masses and other simplified assumptions used in the code procedure

  • 3) It is appropriate to use the approximation of uniform distributed load and axisymmetric elements instead of the actual cosine distribution by modeling the entire tank to obtain the maximum response of circular tanks

Read more

Summary

Introduction

1.1 General Liquid-containing structures (LCS) are important components in the commercial and industrial applications as they are used for storage water and other products such as oil and gas. Storage tanks can be considered as the lifeline of the industrial facilities. They are critical elements in the municipal water supply and fire fighting systems, and are used extensively for storage and/or processing of a variety of liquids and liquid-like materials, including oil, liquefied natural gas, chemical fluids, and wastes of different forms. RC tanks have been used extensively for municipal and industrial facilities for several decades. There are many types of storage tanks depending on the structure type, geometry, construction material, support condition, etc. Ground-supported tanks can be classified according to tank configuration (rectangular or circular), wall support condition (flexible and nonflexible base connections), and method of construction (RC) or (PC) (ACI 350.3-06 2006)

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.