Abstract
An innovative and practical technique for the seismic rehabilitation of beam-column joints using fiber reinforced polymers (FRP) is presented. The procedure is to upgrade the shear capacity of the joint and thus allow the ductile ftexural hinge to form in the beam. An experimental study is conducted in order to evaluate the performance of a full-scale reinforced concrete external beam-column joint from a moment resisting frame designed to earlier code then repaired using the proposed technique. The beam-column joint is tested under cyclic loading applied at the free end of the beam and axial column load. The suggested repair procedure was applied to the tested specimen. The composite laminate system proved to be effective in upgrading the shear capacity of the nonductile beam-column joint. Comparison between the behaviour of the specimen before and after the repair is presented. A design methodology for fibre jacketing to upgrade the shear capacity of existing beam-column joints in reinforced concrete moment resisting frames is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.