Seismic performance of self-centering beam-column joints reinforced with superelastic shape memory alloy bars and engineering cementitious composites materials

Abstract

This paper presents a preliminary experimental investigation of a self-centering beam-column joint reinforced with superelastic Ni-Ti SMA bars and ECC materials. As an alternative to the longitudinal bars in the beam plastic hinge, SMA is used to reduce the residual deformations and dissipate energy, whereas the ECC materials used in the critical region of the joints can improve the ductility of the structural member. Five 1/2 scale frame joints were designed and manufactured. The failure phenomenon, bearing capacity, energy dissipation capacity, displacement ductility, residual deformation, and self-centering performance of the joints were comparatively analyzed through a low cyclic loading experiment. A finite element model of SMA-ECC joints was established, and the influence of the SMA and ECC on the seismic behavior of the joints was investigated. The study results show that SMA bars can dramatically enhance their self-centering capability, enabling self-retrofitting damage. The ECC material is helpful for optimizing the development of the plastic hinge at the end of the beam and improving the ductility and energy dissipation capacity of the structure. The SMA-ECC composite materials exhibit good supplement to significantly improve the ductility, energy dissipation, and self-centering capabilities and delay the stiffness degradation of the structure under extreme events.