Seismic performance of new-type box steel bridge piers with embedded energy-dissipating shell plates under tri-directional seismic coupling action

Abstract

Accurate numerical models are necessary to evaluate the seismic performance and load-bearing mechanism of new-type box steel bridge piers with embedded energy-dissipating shell plates under tri-directional seismic coupling action. Numerical simulations of seismic performance under six types of tri-directional seismic coupling action was conducted. The effects of this stress on the seismic performance of the new-type steel bridge piers was evaluated through analysis of damage mode, hysteresis curve, skeleton curve, stiffness and strength degradation characteristic, and energy-dissipating capacity. This study also compared the numerical analysis with experimental results in order to validate the accuracy of the proposed finite element model. Based on this model, the range of relevant parameters expanded and 88 numerical specimens were analysed for seismic performance, producing further information about the influence of thickness and curvature of the embedded shell plate, spacing of transverse stiffening ribs of the shell, axial compression ratio, and slenderness ratio. Results showed that tri-directional seismic coupling action significantly affects the specimen’s deformation capacity; the embedded shell plate effectively improves the piers’ load-carrying and deformation capacity; and the thickness of the embedded shell plate, width-to-thickness ratio of the wall plate, axial compression ratio, and slenderness ratio significantly affect the seismic performance of the new-type steel bridge piers. To promote the ease of seismic design of new-type box steel bridge piers, this study used theoretical analysis and numerical simulation to calculate equations for the minimum height of the energy-dissipating zone of the bottom embedded shell plate. Finally, formulas were also established to calculate the relevant stability bearing capacity and displacement ductility factor of the new-type steel bridge piers under tri-directional seismic coupling action in order to improve their seismic design.