Abstract
This paper presents the experimental results of six scaled high-strength concrete columns with concrete compressive strengths of 76–86 MPa. Primary experimental parameters include axial loads ranging from 10 to 20% of column axial load-carrying capacity based on concrete gross section; longitudinal steel ratios of 2.46 to 3.53% of the gross sectional area; and volumetric ratios of transverse reinforcement ranging from 1.63 to 3.67%. Model columns with transverse reinforcement designed following the seismic provisions of current code developed sufficient ductility, with displacement ductility factors equal to or exceeding 6.0. The model columns designed with 50% of the transverse reinforcement required by current code also developed sufficient ductility when the axial load was 10% of its axial load-carrying capacity. Lateral load-carrying capacities of all the columns exceeded the flexural capacities calculated based on the equivalent concrete stress block used in current design code. Seismic shear strengt...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.