Abstract
This paper presents the seismic hazard assessment for Thuong Tan-Tan My quarries in Di An commune, Binh Duong province, Vietnam. Combination methods of gravity and magneto-telluric were used to estimate the dip angle and the width of the seismic source. The highest water column of 160 m will cause direct stress on the reservoir bottom with a maximum value of 1535.600 kPa and Coulomb stress of 68.693 kPa (at a depth of 2 km). The typical components of natural earthquake hazard (Mn.max = 5.0, depth of 10 km) in Thuong Tan - Tan My reservoir have the following values: peak ground acceleration PGA = 0.073 g ÷ 0.212 g; peak ground velocity PGV = 2.662 cm/s ÷ 7.984 cm/s; peak ground displacement PGD = 0.706 cm ÷ 1.918 cm at 10% probability of exceedance in 50 years. The typical components of triggered earthquake hazard (Mtr.max = 3.5, depth of 6 km) in Thuong Tan - Tan My reservoir have the following values: peak ground acceleration PGA = 0.024 g ÷ 0.172 g; peak ground velocity PGV = 0 ÷ 5.484 cm/s; peak ground displacement PGD = 0.061 cm ÷ 0.461 cm at 10% probability of exceedance in 50 years.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
