Abstract
Infill panels are widely used as partition walls as well as external walls of the building to fill the gap between RC frames. Nonstructural member may provide considerable stiffness to the building and hence may improve the performance of the RC building during ground motions. But In most of the cases, the ignorance of this property of masonry in designing of the RC frame may get an unsafe design. There are two methods are used to determine the effect of ground motion. The effect of ground motion on RC frame building has been carried out by considering with and without the stiffness of infill wall. A comparative study is carried out with RC building using Equivalent Lateral Force method and Response Spectrum method. The masonry infill has been modeled as an equivalent diagonal strut element using Hendry formula. Pushover analysis is carried out on bare frame and frame with infill wall. The model has been generated using STAAD Pro and results obtained from the analysis are compared in terms of strength and stiffness with bare frame.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Research in Engineering and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
