Seismic evaluation cylindrical concrete shells

Abstract

Abstract The reasons for concrete roof shells’ apparent seismic resistance have been subject to limited research but they have been shown to be inherently resilient to earthquakes. Shells constructed of concrete exhibit high structural efficiency and can therefore be made very thin. As a result of their relatively lightweight nature, thin shell structures are implicitly resistant to earthquake forces. The shell structure is typically designed so that it performs optimally under gravity loads, which are carried mainly by membrane action over the shell surface. As earthquakes induce unexpected horizontal forces, concrete shell structures can be damaged by bending stresses. By studying 8 cm-thick concrete roof shells using parametric analysis, this research shows that small and midsized (span <30 m) thin concrete roof shells can indeed be intrinsically earthquake resistant. These structures have high geometric stiffness and low mass, which results in fundamental frequencies far higher than those of realistic seismic events. Under earthquake excitation, these characteristics result in elastic shell behavior, without exceeding the maximum concrete strength. A shallow shell exhibits greater stress in response to earthquake vibrations caused by the vertical components than by horizontal components. Further, by increasing the rise and curvature of large shells, the fundamental frequency increases and the damaging effect of vertical earthquake vibration is reduced. The aim of this study in general is to show the analysis and the effect of earthquakes on cylindrical concrete shells.