Abstract
To alleviate the shortage of river sand and the pollution of construction waste, this paper proposed the tailings and recycled aggregate concrete (TRAC) and its application in concrete-filled steel tube (CFT) columns. Six full-scale TRAC filled square steel tube (TRACFST) columns were tested under axial static load and lateral cyclic load, and the results were verified by the finite element method(FEM). The principal parameters were substitution rate of RAC (0%, 50%, 100%) and axial load ratio (0.3, 0.5). The failure mode of the specimens was presented. Based on the experimental data, the hysteresis curves, skeleton curves, ductility, energy dissipation capacity, and stiffness degradation of the specimens were analyzed. The difference of peak bearing capacity of specimens with different RAC substitution rates was no more than 5%. The average ductility coefficient of the specimens with 100% substitution rate increased by 1%-7% compared with the specimens with 0% substitution rate. The TRACFST columns exhibit remarkable seismic performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.