Seismic application of steel rocking column bases with replaceable cover plates in steel MRFs

Abstract

This paper presented unidirectional and bidirectional cyclic loading test results of a novel steel rocking column base. Feasibility of the column base in steel moment-resisting frames was verified through nonlinear static and time history analysis. It was found that the column base was capable of dissipating seismic energy through plastic bending deformation of the replaceable cover plates and flag-shaped hysteretic curves can be observed. Nevertheless, it is not expected to provide much energy dissipation for the whole structural system, since the plastic bending deformation of each cover plate is only in one direction. A three-dimensional simplified numerical model of the column base was developed and validated against the test results. Following that, nonlinear static and time-history analysis were conducted on prototype steel moment-resisting frames with and without the rocking column bases. In general, replacing some column bases with the rocking ones (i.e., 4/24 of all in this study) did not cause much reduction in lateral resisting stiffness and capacity. Moreover, this reduction was even slighter when the loading direction was perpendicular to the weak axis of the rocking column section. On the other hand, replacing all fixed column base with the proposed rocking column base may cause drift concentration in the ground storey, which is too radical for the prototype building. The seismic responses of modified frames were generally very close to that of the original frame with all fixed column bases. Even though the maximum drifts in the ground storey of these frames were larger than that of the original frames with fixed bases, the maximum drifts of the whole structures were not expected to be amplified. • Bidirectional cyclic loading tests on a novel steel rocking column base were conducted. • The column base showed flag-shaped hysteretic cures and dissipated seismic energy through plastic deformation of the replaceable cover plates. • Feasibility of the column base in steel moment-resisting frames was verified through nonlinear static and time history analysis. • Replacing some column bases with the rocking ones did not cause much reduction in lateral stiffness and capacity.