Seepage and pore pressures around contiguous pile retaining walls

Abstract

Diaphragm and bored pile retaining walls are often used for the construction of basements, metro station boxes and cut-and-cover tunnels in urban areas. While diaphragm and secant pile walls are generally intended (and assumed in analysis) to be effectively impermeable, contiguous piles may allow through-the-wall seepage even when preventative measures have been undertaken. Provided the flow rates can be tolerated or dealt with, through-the-wall seepage should result in a reduction in pore water pressures behind the retaining wall compared with an impermeable construction, giving the potential for reductions in the depth of embedment and wall thickness, and hence cost. However, this potential is rarely realised owing to the difficulty in quantifying with sufficient confidence the hydraulic regime associated with a leaky retaining wall. This paper reports the results of laboratory investigations and numerical analyses carried out to assess the effect of the inter-pile gaps on the pore pressure distribution around a contiguous pile retaining wall. The results show that the pore pressures behind the piles reduce significantly as the pile spacing is increased. Long-term field monitoring confirms that the pore water pressures are much lower than would be expected for an impermeable retaining wall in similar soil. The applicability of a simple expression linking the pile diameter, pile spacing and the effective permeability of an equivalent uniform wall is demonstrated.