Sediment in-situ bioremediation by immobilized microbial activated beads: Pilot-scale study

Abstract

A field study was carried out to investigate the sediment in-situ bioremediation by adding microbial activated beads. In this work, Calcium carbonate, silicon dioxide, activated carbon powder, attapulgite powder, sodium alginate, microbial liquid and polyvinyl alcohol were utilized to make the immobilized microbial activated beads. Field experiment results showed that the removal rate of NH4+-N, TN and COD in overlying water reached about 61.8%, 87.5% and 87.1%, respectively. The initial concentration of NH4+-N, TN and COD was 159 mg/L, 6.24 mg/L and 7.28 mg/L, whereas and the final concentration was 58 mg/L, 0.78 mg/L and 0.94 mg/L when water temperature, DO, pH and C/N ratio were 25–30 °C, 2–3 mg/L, 7.0–8.0 and 10–15, respectively. Moreover, under optimal temperature condition (25–30 °C), the removal rate of TOC, TN, heterotrophic bacteria and sulfur bacteria in the river sediment reached to 46.5%, 50.7%, 39.2% and 73.2%, respectively.