Abstract
Excess usage of water than it is actually needed and water theft are the major issues leading to water scarcity nowadays. Some people draw more water by using motor pump. Whenever they use motor pump, or they open the valve to the maximum, the flow rate will be increased. Hence in the proposed system, measurement of flow rate plays a vital role. Water monitoring and theft prevention system are employed which records the flow rate and thereby providing notification about the theft and excess usage of water. In the proposed system, each consumer end is provided with a water flow monitoring system which consists of a flow sensor to measure the flow rate and an arduino controller for recording the flow rate. The flow rate value will be sent to the water distribution station using GSM. The flow rate is fixed by the central water distribution station, so that each consumer end will be receiving an equal quantity of water. Solenoid valve is attached in the Pipeline so that the flow rate can be varied by adjusting the valve position. The valve position, time of supply and the flow rate will be controlled by the central water distribution system. The GSM MODEM is initiated by the ON/OFF switch which is controlled by the arduino.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Innovative Technology and Exploring Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
